manualshive.com logo in svg

National Instruments 6589, Getting Started Manual, Page: 9 / 22

Share
Download
National Instruments 6589 Getting Started Manual Download Page 9

Caution

 

Connections that exceed any of the maximum ratings of any connector on

the NI 6589 can damage the device and the chassis. NI is not liable for any damage
resulting from such connections.

Note

 

If you design a custom cabling solution with the Infiniband connector

(779157-01) and the SHB12X-B12X LVDS shielded cable (192344-01), the NI 6589
pinout is reversed at the end connector. For example, the signal shown on pin 1 maps
to pin 73 in the pinout at the end connector.

The following table contains SMA pin location information and signal information for the
NI 6589. The signal names listed in this table refer to the signals shown in the front panel
pinout.

Table 2.

 SMA Connector Names and Descriptions

Signal Name Connector Signal Type

Signal Description

 

 

 

 

PFI 0

PFI 0

Control

Bidirectional single-ended terminal for channel
PFI 0.

CLOCK IN

CLOCK IN Clock

External single-ended clock input terminal.

The following table contains DDC pin location information for the NI 6589. The signal names
listed in this table refer to the signals shown in the front panel pinout.

Table 3.

 NI 6589 DDC Connector Names and Descriptions

Signal Name

Pin(s)

Signal

Type

Signal Description

 

 

 

 

DDC CLK OUT+ 65

Control

Positive terminal for the LVDS
exported Sample Clock.

DDC CLK OUT- 66

Control

Negative terminal for the LVDS
exported Sample Clock.

62

Control

Positive differential terminal for the
external Sample Clock source that
can be used for synchronous
dynamic acquisition.

STROBE-

63

Control

Negative differential terminal for
the external Sample Clock source
that can be used for synchronous
dynamic acquisition.

NI 6589 Getting Started Guide

  | 

© National Instruments

  | 

9

Summary of Contents for 6589























Reviews:

No comments