©
National Instruments Corporation
17
NI 6584R User Guide and Specifications
Storage environment
Ambient temperature range ...........................–20
°
C to 70
°
C,
tested in accordance with IEC-60068-2-1 and
IEC-60068-2-2.
Relative humidity range .................................5% to 95%, noncondensing,
tested in accordance with IEC-60068-2-56.
Note
Clean the device with a soft, non-metallic brush. Make sure that the device is completely dry
and free from contaminants before returning it to service.
Glossary
Maximum
and
minimum
specifications are warranted not to exceed these values within certain operating
conditions and include the effects of temperature and uncertainty unless otherwise noted.
Nominal
specifications are unwarranted values that are relevant to the use of the product and convey the
expected performance of the product.
Safety
This product meets the requirements of the following standards of safety for electrical equipment for
measurement, control, and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
Note
For UL and other safety certifications, refer to the product label or the
section.
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for electrical equipment for
measurement, control, and laboratory use:
•
EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity
•
EN 55011 (CISPR 11): Group 1, Class A emissions
•
AS/NZS CISPR 11: Group 1, Class A emissions
•
FCC 47 CFR Part 15B: Class A emissions
•
ICES-001: Class A emissions
Note
For the standards applied to assess the EMC of this product, refer to the
section.
Note
For EMC compliance, operate this device with shielded cables.
CE Compliance
This product meets the essential requirements of applicable European Directives as follows:
•
2006/95/EC; Low-Voltage Directive (safety)
•
2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Online Product Certification
Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance
information. To obtain product certifications and the DoC for this product, visit
ni.com/
certification
, search by model number or product line, and click the appropriate link in the
Certification column.
