background image

Specifications

Digital I/O

VHDCI DIO channels ............................ 32, single-ended

VHDCI control channels........................ 6, single-ended

DAQ DIO channels ................................ 32, single-ended

DAQ control channels............................ 8, single-ended

Traces

Type ....................................................... Matched length to 100 mils

AC impedance........................................ 50 

Ω

Power

Maximum voltage rating ........................ 5.5 V

Physical

Dimensions............................................. 62.7 

×

 69.3 

×

 16.7 mm 

(2.47 

×

 2.73 

×

 0.66 in.)

I/O connectors ........................................ 68-pin VHDCI connector,

6 position screw terminal, 
8 position screw terminal,
68-pin DAQ connector

Recommended wire gage ....................... 22-26 AWG

Recommended torque 
for screw terminals................................. 0.3 N 

·

 m (2.7 lb 

·

 in)

Recommended torque 
for cover screws ..................................... 0.23 N 

·

 m (2.0 lb 

·

 in)

Weight .................................................... 60 g (2.1 oz)

Caution

When connected to other test objects, this product may cause radio interference. 

In a residential environment, the user may be required to take adequate measures to reduce 
the radio interference.

Summary of Contents for 653 Series

















Reviews: