background image

 

LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments 
Corporation. Refer to the 

Trademark Information 

at

 

ni.com/trademarks

 for other National Instruments trademarks. Other product and 

company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments 
products/technology, refer to the appropriate location: 

Help»Patents

 in your software, the 

patents.txt

 file on your media, or the 

National 

Instruments Patent Notice

 at 

ni.com/patents

. You can find information about end-user license agreements (EULAs) and third-party legal 

notices in the NI-DAQmx Readme. Refer to the 

Export Compliance Information 

at 

ni.com/legal/export-compliance

 for the National 

Instruments global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other import/export data. 

© 2006–2012 National Instruments. All rights reserved.

374435C

Nov12

Where to Go for Support

The National Instruments Web site is your complete resource for technical 
support. At 

ni.com/support

 you have access to everything from 

troubleshooting and application development self-help resources to email 
and phone assistance from NI Application Engineers.

A Declaration of Conformity (DoC) is our claim of compliance with the 
Council of the European Communities using the manufacturer’s 
declaration of conformity. This system affords the user protection for 
electromagnetic compatibility (EMC) and product safety. You can obtain 
the DoC for your product by visiting 

ni.com/certification

. If your 

product supports calibration, you can obtain the calibration certificate for 
your product at 

ni.com/calibration

.

National Instruments corporate headquarters is located at 
11500 North Mopac Expressway, Austin, Texas, 78759-3504. 
National Instruments also has offices located around the world to help 
address your support needs. For telephone support in the United States, 
create your service request at 

ni.com/support

 and follow the calling 

instructions or dial 512 795 8248. For telephone support outside the United 
States, visit the Worldwide Offices section of 

ni.com/niglobal

 to access 

the branch office Web sites, which provide up-to-date contact information, 
support phone numbers, email addresses, and current events.

Summary of Contents for 653 Series

















Reviews: