Index
I-4
©
National Instruments Corporation
GPCTR0_UP_DOWN signal, 4-35
GPCTR1_GATE signal, 4-37
GPCTR1_OUT signal
description (table), 4-4
general-purpose timing signal
connections, 4-38
I/O signal summary (table), 4-6
GPCTR1_SOURCE signal, 4-36
GPCTR1_UP_DOWN signal, 4-38 to 4-40
ground-referenced signal sources
description, 4-8
differential connections, 4-12
single-ended connections (NRSE
configuration), 4-16 to 4-17
H
hardware
configuration, 2-3
installation, 2-1 to 2-2
hardware overview
analog input, 3-2 to 3-4
input mode, 3-2
multichannel scanning
considerations, 3-3 to 3-4
analog output, 3-4
block diagram, 3-1
digital I/O, 3-4
timing signal routing, 3-5 to 3-8
device and RTSI clocks, 3-6
programmable function inputs, 3-6
RTSI triggers, 3-7 to 3-8
I
input mode. See analog input modes.
input range
exceeding common-mode input ranges
(caution), 4-9
measurement precision (table), 3-3
overview, 3-2 to 3-3
installation
common questions, C-2
hardware, 2-1 to 2-2
software, 2-1
unpacking 6025E devices, 1-3
I/O connectors, 4-1 to 4-7
exceeding maximum ratings
(caution), 4-1
optional connectors, B-1 to B-3
50-pin E series connector pin
assignments (figure), B-3
68-pin E series connector pin
assignments (figure), B-2
pin assignments (figure), 4-2
signal descriptions (table), 4-3 to 4-5
signal summary (table), 4-6 to 4-7
L
LabVIEW and LabWindows/CVI application
software, 1-4
M
manual. See documentation.
multichannel scanning considerations,
3-3 to 3-4
N
National Instruments Web support, D-1 to D-2
NI-DAQ driver software, 1-4 to 1-5
noise, environmental, 4-40 to 4-41
NRSE (nonreferenced single-ended) mode
description (table), 3-2
differential connections, 4-13 to 4-14
recommended configuration
(figure), 4-10
single-ended connections for
ground-referenced signal sources,
4-16 to 4-17
