12
|
ni.com
|
NI 5782R User Manual and Specifications
c.
In the
Configure Open FPGA VI Reference
dialog box, click the
Browse
button
next to the
Bitfile
button.
d.
In the
Select Bitfile
dialog box that opens, select the bitfile for your desired target. The
bitfile name is based on the adapter module, example type, and FPGA module.
e.
Click the
Select
button.
f.
Click
OK
in the
Configure Open FPGA VI Reference
dialog box.
g.
Save the VI.
7.
On the front panel, in the
RIO Resource
pull-down menu, select an NI 5782R resource that
corresponds with the target that you configured in step 6.
8.
Select
AI 0
in the
AI Channel control
.
9.
Set the
Trigger Level (V)
and the
Record Size
controls to the desired values.
10. In the
Trigger Type
box, select either
Software
or
Data Edge
. If you select
Software
, the
VI acquires data every time you click the
Software Trigger
button on the front panel of the
VI. If you select
Data Edge
, the VI acquires data every time an edge occurs.
11. Click the
Run
button to run the VI.
12. Click the
Software Trigger
button if you selected
Software
in the
Trigger Type
control.
The VI acquires data and displays the captured waveform on the
Acquired Waveform
graph as shown in Figure 5.
13. Click the
STOP
button to stop the VI.
14. Close the VI.
