National Instruments 5412, Calibration Procedure

Page: 20 / 48

20
|
ni.com
|
NI 5412 Calibration Procedure
4. Call niFgen_SetAttributeViReal64 to set the offset (niFgen property node:
Arbitrary Waveform Output»Arbitrary Waveform Offset ) using the following
parameters:
•
vi
: The session handle returned from niFgen_init
•
channelName
: "0"
•
attributeID
: NIFGEN_ATTR_ARB_OFFSET
•
value
: The
Ideal Positive Offset
value listed in Table 5 for the current iteration.
10 0.850000 0.425000 -0.425000 ±0.001988 ±0.004113
11 0.600000 0.300000 -0.300000 ±0.001550 ±0.003050
12 0.415000 0.207500 -0.207500 ±0.001226 ±0.002264
13 0.300000 0.150000 -0.150000 ±0.001025 ±0.001775
14 0.205000 0.102500 -0.102500 ±0.000859 ±0.001371
15 0.150000 0.075000 -0.075000 ±0.000763 ±0.001138
16 0.105000 0.052500 -0.052500 ±0.000684 ±0.000946
17 0.075000 0.037500 -0.037500 ±0.000631 ±0.000819
18 0.055000 0.027500 -0.027500 ±0.000596 ±0.000734
19 0.037500 0.018750 -0.018750 ±0.000566 ±0.000659
20 0.026000 0.013000 -0.013000 ±0.000546 ±0.000611
21 0.018500 0.009250 -0.009250 ±0.000532 ±0.000579
22 0.013000 0.006500 -0.006500 ±0.000523 ±0.000555
23 0.009000 0.004500 -0.004500 ±0.000516 ±0.000538
24 0.006500 0.003250 -0.003250 ±0.000511 ±0.000528
Error Positive Offset Value
= (
Measured Positive Offset Value
) - (
Ideal Positive Offset Value
)
Error Negative Offset Value
= (
Measured Negative Offset Value
) - (
Ideal Negative Offset Value
)
Table 5.
Values for Verifying the Offset of the Main Analog Path (Continued)
Iteration Gain
Ideal
Positive
Offset
(Volts)
Ideal
Negative
Offset
(Volts)
Calibration
Test Limit
(Volts)
Published
Specification
(Volts)