WARNINGS
Be aware of warning and cautionary information, designated by a gray text box. These areas will contain information regarding dangers to the
operator and/or the machine and instruction to prevent injury.
ORGANIZATIONAL MEASURES AND SAFETY
Before starting any work with or on the machine, all authorized personnel must read the instruction manual and, in particular, the section
regarding safety instructions.
Appliances used in different locations must be connected via a current surge prevention switch.
Always wear goggles when using the machine. Wearing gloves, non-slip shoes, and an apron is recommended.
Sawdust and splinters must be removed while the machine is running.
Extreme electromagnetic interferences from the outside could temporarily cause variations in the rotation speed.
MAINTENANCE AND TROUBLESHOOTING DURING WORK
Disconnect machine from power supply prior to performing any maintenance. Only unplug or plug in machine when it is turned off.
Keep mains lead clear of the machine during operation; always lead the cable away from behind.
The ventilation slots of the machine must be kept clear at all times. If the carbon brushes are worn, the brushes should be exchanged and the
tool should be sent to a service center for inspection.
6
CAUTION:
SPARE PARTS MUST CONFORM TO THE MANUFACTURER’S SPECIFICATIONS. THIS IS ALWAYS GUARANTEED WITH NFE
ORIGINAL PARTS.
WARNING:
THE MAX PERMITTED NOISE LEVEL MAY BE EXCEEDED. OPERATORS MUST WEAR NOISE-PROTECTIVE GEAR.
WARNING:
ALL MACHINERY CAN BE DANGEROUS FOR OPERATING, MAINTENANCE, AND REPAIR PERSONNEL IF USED INCOR-
RECTLY. OWNERS ARE RESPONSIBLE FOR COMPLIANCE WITH SAFETY REGULATIONS DURING OPERATIONS AND MAINTENANCE OF
THE SAFETY DEVICES SUPPLIED WITH THE MACHINE, AND FOR PROVIDING SUITABLE SAFETY DEVICES. IT IS STRICTLY PROHIB-
ITED TO REMOVE OR CHANGE THE SECURITY SYSTEM OF THE MACHINE!
Safety
6
402616_TROLLEY_RevE