National Flooring Equipment DL6000P, Operating & Service Manual, Page: 22 / 52

22
Operation
WORK CYCLE
1.
Make sure the power plug is correctly fitted in the power socket.
2.
Make sure the flexible hose is properly fitted and locked in the suction inlet.
3. Make sure the power cable and any extension cord used are integral and in perfect condition.
4. Always use the caster wheel brake to prevent the machine from rolling.
5.
Grip one end of the flexible hose complete with selected accessory.
6. Flip up the Start switches and start vacuuming.
7.
To stop the dust collector, flip down the Stop switches.
8.
After finishing work, disconnect the dust collector from the power socket.
WARNING:
BEFORE FITTING THE PLUG, MAKE SURE THE POWER VOLTAGE CORRESPONDS TO THAT ON THE CE MARKING PLATE.
THIS MACHINE MUST BE POWERED BY 230V 1-PHASE POWER.
CAUTION:
BEFORE SWITCHING THE DUST COLLECTOR BACK ON, MAKE SURE THE MOTORS HAVE COME TO A COMPLETE HALT.
406816_RevB