National Flooring Equipment DL4000, Instruction Manual

Page: 8 / 32

Information Section
- 5 -
(*) Noise level
Noise level readings were taken in accordance with the provisions of
Machine Directive 2006/42/EC
standards.
Sound tests performed on this specific dust collector model have been taken from a distance of 3.28 ft (1 m)
and from a height of 5.25 ft (1.6 m), showing an acoustic pressure no higher than the one indicated in the
table.
The vibrations transmitted by the machine are lower than 8.2 ft/s
2
(2.5 m/s
2
).
Attention!
Pursuant to articles L.D. 81/08, workers exposed to sound pressure levels above 85 dB (A) must be
protected by special individual protection devices.
It is therefore necessary, if such working conditions exist, to provide workers with such approved
individual protection devices and to inform them of the risks relating to noise exposure.
1.7 Handling
If the need arises to lift and transport the dust collector, this operation must be performed under the
responsibility of the user. The user is therefore responsible for properly securing the load to prevent machine
damage or injury to personnel.