National Flooring Equipment DL4000, Instruction Manual, Page: 21 / 32

Operation Section
- 18 -
3.4 Removal and placing of the waste bag
➢
Stop the dust collector motors by pressing the relevant STOP buttons.
Warning!
Disconnect the plug from the power socket.
➢
Use two ties to fasten the collection bag at two points about 1 – 2” ( 3 – 5 cm) from each other, just
below the filter chamber.
➢
Cut off the bag in the position between the two ties.
➢
Remove the lower part of the bag.
➢
Pull down a length of new bag from the chamber, until it reaches the bottom support plate
Attention!
Used bags should be disposed of into a special waste disposal container, in accordance with laws
applicable in the country where the dust collector is used.