National Cycle, Inc.
PO Box 158 Maywood, IL 60153-0158 USA P: 708-343-0400 / F: 708-343-0625 / E: [email protected]
www.nationalcycle.com
©2022 National Cycle, Inc.
Page 2 of 4
10-129518-000 11/22
INSTALLATION; CONT’D
Step 3
Once the mounting screws are removed, pivot the entire head-
light cowl assembly forward and down until it rests.
Step 4
Remove the OEM aluminum bushings on both sides, and then
remove the OEM rubber grommets.
Step 5
Replace the OEM rubber grommets with the two Delrin Plastic
Headlight Bushings
(B)
included with your new windscreen.
Insert them from the inside of the cowling as shown, and press
them into place.
Step 6
Pivot the entire headlight cowl assembly up and back into place.
Step 7
Replace the OEM upper mounting bolts and tighten with a 5mm
hex wrench.
Step 3
Step 4
Step 5
Step 6
Step 7