INSTALLATION
Install Windshield
1.
Install one Plastic Washer (5) over each
threaded mount stud.
Figure 8
2.
Install Windshield over mount studs.
2.
Remove backing paper from a Poron Washer
(6). Install one Washer over each mount hole.
Figure 9
3.
Use the OEM bolt and washer assembly to
secure Windshield to scooter. Repeat proce-
dure at all four holes.
Tighten Screws firmly.
Do
not overtighten.
(10mm Box Wrench)
Figure 10
4.
Re-assemble grill to scooter. Press down on
the metal tab to allow cowl tab to slide in on
top.
Figure 11
5.
Re-install OEM tap screws (C)
. Figure 12
5
6
National Cycle, Inc. Maywood, IL 60153-0158 USA 708-343-0400 / Fax: 708-343-0625
www.nationalcycle.com / email: [email protected]
Page 4 of 5 10-118600-000 03/16
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12
C
