National Cycle, Inc.
PO Box 158 Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 / www.nationalcycle.com / [email protected]
©2020 National Cycle, Inc.
Page 1 of 2
10-110808-000 05/20
Thank you for purchasing a National Cycle product. Read these instructions carefully and thoroughly before beginning work. Dealers, if installing this wind-
screen for a customer, please give them this manual upon completion. It contains information needed to properly maintain and use this product.
Note:
Tips for facilitation of operation, control and
adjustment, as well as maintenance work.
Attention:
Special notes and cautionary measures which can
prevent damage to the accessory or motorcycle.
Item
Description
Part No.
Qty.
BAG#901
1
Screw, Button Head M6 x12 51-516312-000
6
2
Nut, Hex
42-483002-000
6
3
Screw, Button Head M8x35 51-516435-000
4
4
Nut, M8-1.25
42-433030-000
4
5
Bracket
37-410504-000
2
6
Spacer
49-495560-000
4
CLAMPS
7
Left Side Female (Slotted) 37-370031-000
1
8
Left Side Male (Tabbed)
37-370034-000
1
9
Right Side Female (Slotted) 37-370038-000
110
10
Left Side Male (Tabbed)
37-370039-000
1
RUBBER CLAMP SPACERS
11
Large, 3/64 Thick
75-764701-000
4
CONTENTS OF KIT-JL
INSTALLATION INSTRUCTION
Hardware Mount KIT-JL and
Hardware Mount KIT-JM
Mount Kit to install a Heavy Duty
or Dakota 4.5 Windshield to Suzuki C50
TOOLS REQUIRED
Hex Key, 5/32”
Two 7/16” Wrenches
Scissor or Small Knife
Phillips Screw Driver
(to adjust window if necessary)
PREPARATION
Take precaution against paint damage while installing
your windshield kit to your motorcycle. Place a heavy
cloth over the front fender of your motorcycle to prevent
any scratches or dents from occurring should a tool or
part fall during installation.
INSTALLATION
1. Install die cut Rubber Clamp Spacers to each clamp
half.
Trim the Spacer at the inside edge of Right Side Male
and Female Clamp. (Scissor) Diagram A.
Diagram A, RIGHT SIDE
LEFT SIDE
Right and Left are determined from a rider’s perspective
Item
Description
Part No.
Qty.
BAG#910
1
Screw, Button Head M6 x12 51-516312-000
6
2
Nut, Hex
42-483002-000
6
3a
Screw, Button Head M8x60 51-516461-000
4
4
Nut, M8-1.25
42-433030-000
4
5
Bracket
37-410504-000
2
BAG#012
6a
Spacer, 1.61 Length
49-495564-000
4
CLAMPS
7
Left Side Female (Slotted) 37-370031-000
1
8
Left Side Male (Tabbed)
37-370034-000
1
9
Right Side Female (Slotted) 37-370038-000
1
10
Left Side Male (Tabbed)
37-370039-000
1
RUBBER CLAMP SPACERS
11
Large, 3/64 Thick
75-764701-000
4
CONTENTS OF KIT-JM
7
9
8
10
11
11
