National Crane 600H, Service Manual

Page: 187 / 232

NATIONAL CRANE
08-19-2022 Control # 092-13
9-5
600H SERVICE CRANE INSTALLATION
9
360° Full capacity working area.
SFO required
FIGURE 9-3
600H BC Minimum Measurements
360°
6.00
Min
192.00 Min
104.31
66.00
C
Tandem
L
256.00 Min
111.00
118.78
44.69
600H BC 360° Full Capacity Working Area
Working Area 360°
Gross Axle Weight (GAW) Rating 48,000 lb (21772.4 kg)
Wheel Base 256 in (650.2 cm)
Cab to Axle Trunnion (CT) 192 in (487.6 cm)
Frame Section Modulus Under Crane (110,000 psi) 20 in
3
(260.5 cm
3
)
Frame Section Modulus Over Rear jacks (110,000 psi) 13 in
3
(213 cm
3
)
Frame Section Modulus Rear of Front Spring Hanger (110,000 psi) 11 in
3
(180.2 cm
3
)
Frame Section Modulus FSO Attach Point (110,000 psi) 2 in
3
(32.7cm
3
)
Minimum Truck Weight Front 8,700 lb (3946.2 kg)*
Minimum Truck Weight Rear 8,600 lb (3900.8 kg)*
Estimated Final Weight (truck and crane) 30,000 lb (13607.7 kg)
* Weights are for bare truck. Final crane stability weight must include crane, jacks, sub-base, and
20 ft wood bed or be counterweighted accordingly.
GAW Front 14,000 lb
(6350.2 kg)
GAW Rear 34,000 lb (15422.1 kg)
Top of Truck
Frame Rail
20 ft Bed
REFERENCE ONLY