13
Choose your desired media unit location on your wall. Using the wall anchor spacing
dimensions graphic below, begin to line up and mark where you will need to drill holes
for the Wall Anchors (10) or (11). You can also use the Wall Cleat (K) as a guide for
marking the hole locations.
Using a 5/16” drill bit, drill holes on the marks you made on your wall, then push the Wall
Anchors (1) or (11), for the proper wall type, into the holes.
Reminder:
Part 10 is for non-drywall
applications.
Part 11 is for drywall applications.
Helpful Tip:
You can use part K (Wall Cleat) as a guide
when marking the locations to drill.
273mm
273mm
273mm
700mm
Step 9: Wall Mounting
11
10
