National Communications
Page 3
DESCRIPTION Continued
TELEPHONE LINE CONNECTION
1.
Single Telephone Socket Operation
TLM
can be connected to ANY Telephone Socket on the Telephone Line.
If another Telephone Device is to be used on the same Telephone
Socket, then it can be connected using a Double Telephone Adaptor (not
supplied) to the LINE OUTPUT Port of TLM.
2.
Multiple Telephone Socket Operation
a) The
LINE IN
port of
TLM
MUST be connected to the Incoming
Telephone Line (which connects to the first socket on your line).
b) The
LINE OUT
port of
TLM
MUST be then be connected to all
Telephone sockets on the Telephone Line.
c) This installation procedure MUST be carried out by a suitably qualified
telephone technician.
d) This will ensure that there are NO Parallel connected Telephone
Devices used on the same line, which would cause
TLM
to respond as
if the Telephone Line was Cut or Disconnected.
POWER CONNECTION
A 12VAC Power Adaptor is supplied with
TLM
. It can also be operated
from a 12VDC source, with a minimum capacity of 300mA. If an
alternative 12VDC source is used, polarity is not important.
OPERATION WITH ADSL
TLM
can operate on a Telephone Line which also has an ADSL service.
TLM
will not affect the ADSL operation.
ADSL
will not affect the operation of
TLM.
If used, the
ADSL FILTER
should be fitted ahead of the
TLM
device.
