National Communications
Page 5
OPERATING PROCEDURE
TO PLACE A CALL ON HOLD
Press 2 and Hang Up
To place any call
ON HOLD,
simply press
2
on any
telephone on your line and then
HANG UP
your telephone.
If you are using a Cordless Phone, then you may need to
press End or press the key that you use to ‘Hang Up’ calls.
Your caller will be immediately connected direct to your
ON HOLD MESSAGE.
TO RETRIEVE A CALL ON HOLD
Lift the Receiver of any Telephone
or
Press the Answer Key on a Cordless Phone
To resume the call, simply pick up the same telephone or
any other telephone on the line.
If you are using a Cordless Phone, press the key that you
use to ‘Answer’ calls.
Calls can be placed
ON HOLD
as often as necessary.
