Page 14
National Communications
PROGRAMMING PROCEDURE
A.
TURN OFF POWER TO YOUR UNIT
B.
SWITCH ON POWER AND PRESS # (WITHIN 30 SECONDS)
You must use a telephone connected to the SLS-1 Line Out port.
C.
YOUR UNIT WILL OUTPUT 3 SHORT ‘BEEPS’
Do not proceed until you have heard 3 short beeps.
If you do not hear 3 beeps, return to the start (A).
D.
ENTER PROGRAMMING CHANGES 1-4 AS FOLLOWS:
You can change one or more parameters in any order.
1.
FIRST REMINDER RING DELAY TIME
To enter the FIRST RING DELAY press #3xx
where xx = delay in seconds and can be 00-99
For first Ring in 15 seconds, press #315 (Default)
For first Ring in 30 seconds, press #330
Please wait for confirmation beep before proceeding.
2.
PAUSE BETWEEN REMINDER RINGS
To enter the DELAY BETWEEN RINGS press #5xx
where xx = delay in seconds and can be 01-99
For Ring every 15 seconds, press #515 (Default)
For Ring every 30 seconds, press #530
Please wait for confirmation beep before proceeding.
