National Communications
Page 11
USER PROGRAMMING
In most cases the DEFAULT SETTINGS of this device will be suitable
for your requirements and programming will not be necessary.
However,
You can change the frequency of the reminder ring back ring,
the delay before the first ring commences and the total number of
reminder rings that
SLS1
will output.
You can also change the Maximum Time that
SLS1
will maintain a call
On Hold.
All Program Settings are stored in flash memory which will retain your
settings even if power is disconnected.
Program Changes are made by using ‘touch tone’ keys from a standard
analogue telephone connected to the Line Out port of
SLS1
.
THE DEFAULT SETTINGS OF THIS DEVICE ARE :
1.
FIRST REMINDER RING DELAY TIME
= 15 SECONDS
2.
PAUSE BETWEEN REMINDER RINGS = 15 SECONDS
3.
MAXIMUM ON HOLD TIME
=
5 MINUTES
** SEE NEXT PAGE FOR INFORMATION ON EACH USER FUNCTION **