Page 8
Natcomm
SPECIFICATIONS
Dimensions (inches)
4.2 (W) x 4.2 (D) x 1.7 (H)
Dimensions (mm)
106 (W) x 106 (D) x 43 (H)
Weight
6 ounce or 170g
Power Supply
12V AC or 12V DC Power
Power Consumption
Idle - 0.5 W; Call – 0.75W
Line IN Connector
RJ 11 6 pin (2 center)
Line OUT Connector
RJ 11 6 pin (2 center)
Ring Delay Out Connector
RJ 11 6 pin (2 center)
Power Connector
2.5mm barrel connector
FCC & IC COMPLIANT
Supplier Number NC
Ringer Equivalence Number
0.1 REN
WARRANTY
This device is guaranteed against defects from workmanship for a period of two years (24
months) from the date of purchase. In the event of a problem, please call ph 800 530 8645
for assistance and if necessary, a Return Authorization. You should then return your unit,
along with the proof of purchase date, and a written statement about the nature of the
problem.
The Manufacturers obligation is solely to repair or the product. The product may be
replaced at the discretion of the Manufacturer. The warrantor is not liable for any incidental
or consequential damages due to such defects.
This Warranty shall not apply to any unit which has been subject to alteration, modification,
abuse, negligence, accident, external voltage/ lightning surge or used in any manner
contrary to these instructions.
The user is responsible for freight costs to the repair point. The warrantor will be
responsible for freight costs in returning this unit back to the user.
Damage caused to this device or attached equipment by lightning strikes or over voltage
surge is not covered under this warranty.
THE CASE IS SEALED AT THE FACTORY
OPENING THE CASE WILL VOID THE WARRANTY.
