background image

Page 8  

Natcomm

 

 

DS-SIP  :  Door Phone Intercom Connection 

 

DP1 INTERCOM (2 Wire Connection)

 

Connect the CENTER 2 PINS of the 8 pin RJ45 socket of 

DS-SIP

, to the 2 screw terminals 

located on the back of the DOOR PHONE INTERCOM. Polarity is not important.

 

 

If  you  plan  to  use  the  supplied  connection  box  (supplied  for  use  with  Door  or  Gate  Lock 
Control),  then  the  terminals  for  the  GREEN  and  RED  wires  should  be  connected  to  the 
screw  terminals  located  on  the  back  of  the  DOOR  PHONE  INTERCOM.  Polarity  is  not 
important. 

 

 

The LED on the DOOR PHONE INTERCOM should then turn ON (

DS-SIP

 must be ON).

 

 

The DOOR PHONE INTERCOM should be mounted onto your wall surface. With DP1 this is 
done by separating the Door Phone unit from the integral backing plate, secured by a screw 
underneath  the  grey  plastic  label,  above  the  speaker.  The  backing  plate  should  then  be 
screwed to the wall surface, before re-attaching the Door Phone Intercom with the securing 
screw.

 

 

DP2-DP5 INTERCOMS

 

(4 Wire Connection)

 

Connect Pins 4 & 5 (the center 2 pins) of the 8 pin RJ45 socket of 

DS-SIP

 to the center 2 

inputs  of  the  supplied  4  position  Phoenix  Plug.  Polarity  is  not  important.  This  is  the  Audio 
Pair.

 

 
Also c

onnect Pins 3 & 6 (the 2 pins either side of the center 2 pins) of the 8 pin RJ45 socket 

of 

DS-SIP

, to the outside positions of the 4 position Phoenix Plug. Polarity is not important. 

This is 12V and GND for the Door Phone Intercom. 
 
If you plan to use supplied connection box (supplied for use with Door or Gate Lock Control), 
then  the  terminals  for  the  GREEN  and  RED  wires  should  be  connected  to  the  center  2 
positions of the 4 position Phoenix Plug (pins 2 & 3) and the terminals for the BLACK and 
YELLOW wires should be connected to the outer 2 positions of the 4 position Phoenix Plug 
(pins 1 & 4). Polarity is not important.

 

 

LOCK CONTROL

 

(for 1 or 2 Locks)

 

 

A connection box is supplied with 

DS-SIP

 to provide a convenient means of connecting 

power for the 1 or 2 Doors or Gates that will be used.  
 
This will also allow you to locate the Power Supplies for the 1 or 2 Doors or Gates, inside the 
building next to 

DS-SIP

, so they are out of the weather.  

 
See pages 10-11 for further details. 

 

Summary of Contents for DS-SIP

















Reviews: