Page 4
Natcomm
MOUNTING THE DOOR PHONE
The DOOR PHONE should be mounted at the average face
height of 1.5 meter (5 feet) for optimum performance.
The
DP1
Surface Mount Door Phone unit is designed to be fitted
onto a wall surface.
This is done by separating the Door Phone unit from the integral
backing plate which is secured by a screw under the bottom lip of
the Door Phone.
The backing plate should then be screwed to the wall surface
before re-attaching the Door Phone with the securing screw.
DOOR PHONE COVER
If your Door Phone is exposed to excessive weather (in particular
rain), an additional DOOR PHONE COVER may be required to
ensure that water from rain cannot gradually permeate through to
the electronics of
DP1
.
Failure to use a suitable Door Phone Cover can cause unreliable
operation and can eventually lead to permanent failure of this
device.
An accessory Door Phone Cover are made
from strong 5mm transparent Perspex is
available from Natcomm.
Order Code is DPC-1
: RRP is $39.00 incl GST.
