background image

 

Page 3  

Natcomm

DOOR PHONE PERFORMANCE

 

  

This product is IDEAL for RESIDENTIAL or COMMERCIAL USE 
where  ROAD  NOISE  is  NOT  HIGH.  It  is  not  designed  for 
INDUSTRIAL USE where ambient noise can be constantly high.  
 

The  volume  of  the  audio  communication  on  the  internal 
phones should be comfortably audible (although not quite as 
loud as a telephone call) providing: 
 

  The person at the Door Phone is talking directly towards the 

Door Phone and at a distance of no more than 500-600mm 
away (2 feet). 

  The Door Phone is mounted at a height of about 1.5 meters 

(5 feet). You can mount at a lower level to allow for very young 
children but volume may suffer. Please see page 4. 

  No plates or other material are placed over the front face of 

the  Door  phone.  Our  Door  Phone  Cover  accessory  or  a 
properly designed Rain Hood will not affect performance. 

 
The  volume  of the  audio  communication  at the  Door  Phone 
should be comfortably audible providing: 

 

  There is not excessive road noise or other noise near the Door 

Phone as this will affect the automatic gain circuit used in this 
device. 

  That high quality ADSL FILTERING is fitted ahead of the DS 

CONTROLLER where ADSL is used on the same line. If you 
do not do so, volume in both directions will be affected. Refer 
to  your  Door  Station  Controller  User  Guide  for  detailed 
information on the use of ADSL with this product. 

 

 

 

 

Summary of Contents for DP1









Reviews: