Nastec SUND Series, Installation And Use Manual

Page: 12 / 24

12
5.1 Monitoring and programming
In order to access to parameters monitoring and programming it is necessary to use a smartphone or tablet with Bluetooth
4.0 (BTLE) and Nastec NOW App installed. The App is available on Android or iOS and can be downloaded free of charge
through the on-line stores.
It is possible to disable the BTLE connection by removing power supply, wait at least 30 seconds till the red STAND-BY led is
OFF, keep pressed together START/STOP button and DOWN button and give power supply. Release the buttons after 5
seconds.
It is then possible to enable the BTLE connection by removing power supply, wait at least 30 seconds till the red STAND-BY
led is OFF, keep pressed together START/STOP button and UP button and give power supply. Release the buttons after 5
seconds.
Through the App it is possible to:

Monitor multiple operating parameters simultaneously.

Get statistics of energy consumption and check alarms history.

Perform reports with the possibility to insert notes, images and email them or keep them into the digital archive.

Make programs, save them in the archive, copy them to other devices and share them among multiple users.

Remotely control, via wi-fi or GSM, a device, using a smartphone nearby as a modem.

Access to manuals and additional documentation.

Have on-line help on parameters and alarms details.
5.1.1 Monitoring
Following parameters can be monitored through the App in “Monitor” selection.
Actual value [bar] Actual value is the value read by the sensor.
Set value [bar] Set value is the value which has to be kept constant.
Frequency [Hz] Motor running frequency.
Voltage Bus DC [V] DC voltage on capacitor bus.
Motor current [A] Phase current absorbed by the motor.
Motor power factor Motor cosphi (P.F.).
Power [W] Electrical power absorbed by the motor.
Module temperature [°C] IGBT module temperature.
PCB temperature [°C] Printed circuit board temperature.
Inverter hours [h] Total inverter hours.
Motor hours [h] Total motor running hours.
Address Unit address when in COMBO mode.
ALARM HISTORY Record of last 8 alarms.