manualshive.com logo in svg

NASdeluxe NDL-2400R-R, User Manual

Share
Download
NASdeluxe NDL-2400R-R User Manual Download Page 73

NASdeluxe NDL-2400R iSCSI/NAS System - Manual 

 

 

www.NASdeluxe.com 

Page 73

Chapter 7: Tips and Tricks 

USB and eSATA Storage Expansion 

The NDL-2400R supports external USB hard disks through its three USB ports. 
Once a USB hard disk has successfully mounted, the entire volume will be copied 

automatically to the default USB HDD folder. The NDL-2400R supports up to 6 
USB external storage devices. All file names on the USB disk volume are case 

sensitive. 
 

The NDL-2400R also supports eSATA hard disks with its eSATA port. 
 

Before attaching an eSATA or USB disk drive to NDL-2400R, you have to partition 
and format it on a desktop computer or a notebook first. The attached device will 
be located at 

\\192.168.1.100\usbhdd\sdf1

 where 

192.168.1.100

 means the 

IP address of NDL-2400R and 

sdf1

 stands for the first partition on disk #6, the 

eSATA or USB disk drive. If it is an NTFS partition, NAS users can open or copy 
files from 

\\192.168.1.100\usbhdd\sdf1

 but cannot add new files or modify 

existing files.  

 
 
 

 
 

 
 

Adding a Spare Disk  

With a RAID 1, RAID 5, RAID 6, or RAID 10 volume, you can add a spare disk 

after the initial RAID is setup. To add a spare disk, follow the steps below: 
 

1.

 

On the RAID Configuration Screen, tick the checkbox of the hard disk 
you wish to designate as a spare disk. 

 
2.

 

Click Add Spare. The disk will be configured as a spare disk. The system 
automatically rebuilds the spare disk when one of the disks in the RAID set 

fails.  

 

Target USB 

NDL-2400R can operate in dual mode. When connecting to a regular USB disk or 

thumb drive, NDL-2400R is acting as USB host. When connecting to a PC thru its 
USB Type B connector on the back panel, NDL-2400R can act as a USB disk. This 

feature allows user to transfer files without using network connection. 
 

When you create RAID, you can assign a portion of space on the RAID to be used 
as USB disk. When connecting NDL-2400R to a PC using the supplied USB A to B 

cable, the PC will recognize this space as an unformatted disk. At this point, the 
PC can format this portion of disk and create file system on it. Since this disk is 
created on the RAID, it will be protected by the RAID level you select. 

 
 

 
 

NOTE 

If you want to write to an USB storage device, the file system must be 

FAT32. 

 

USB Storage 

FAT32 Partition 

NTFS Partition 

Read

OK

OK

Write

OK

-

 

WARNING 

When RAID is removed or damaged, all the data on the Target USB 

device will be deleted. 

Summary of Contents for NDL-2400R-R































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands