NASdeluxe NDL-2400R-R User Manual Download

Page: 42 / 94

NASdeluxe NDL-2400R iSCSI/NAS System - Manual

www.NASdeluxe.com

Page 42

LAN Configuration

The NDL-2400R supports two Gigabit
Ethernet ports for higher service availability.

To configure these ports, choose LAN from
the Network menu, and the LAN

Configuration screen appears. Press Apply
to save your changes.

LAN Configuration

Item Description
MAC Address

Displays the MAC address of the LAN interface.

Specifies the IP address of the LAN interface.

Netmask

Specifies the Network Mask of the LAN interface.

Jumbo Frame Support

Enable or disable Jumbo Frame Support on the LAN interface.

DHCP Configuration

A DHCP server can be configured to assign IP addresses to devices connected to

the LAN port. To configure these ports, choose LAN from the Network menu.

DHCP Configuration

Item Description
DHCP Server

Enable or disable the DHCP server to automatically assign IP

address to PCs connected to the LAN interface.

Start IP

Specifies the starting IP address of the DHCP range.

End IP

Specifies the ending IP address of the DHCP range.

DNS Server

Displayed the DNS server IP address.

NOTE

Before enabling Jumbo Frame Support, please make sure your network

equipment supports Jumbo Frame. If your equipment is incompatible,

you might not be able to connect to your NDL-2400R. In this case, you

have to reset the system back to default by the holding down front
panel reset button for 5 seconds during boot up process.

NOTE

The IP Segment of WAN and LAN should not overlap.

WARNING

The IP address of the LAN interface should not be in the range of the

Start IP address and End IP address.

Summary of Contents for NDL-2400R-R































































































Search results

Summary of Contents for NDL-2400R-R

Reviews:

Related manuals for NDL-2400R-R

Brands by name

Popular brands

NASdeluxe NDL-2400R-R, User Manual

Search results

Summary of Contents for NDL-2400R-R

Reviews:

Related manuals for NDL-2400R-R

Brands by name

Popular brands