Figure 7
A.
C. Intravenous Infusions
1. Begin with a fully pressurized arm. See procedure A under
General Instructions for Use.
2. Select the appropriate intravenous infusion needles or
butterfly included. Nasco Healthcare recommends small
gauge needles 20-25 gauge.
3. Make sure the arm is palm down and the clamps on Bags A
and B are closed.
4. Simulate cleansing the injection site with distilled water,
alcohol, or iodine solution.
5. Insert the IV needle or butterfly into a vein. Flashback will
indicate proper insertion.
6. Attach the needle or butterfly to the tubing from the infusion
solution (not supplied) or fluid supply bag C (sold separately)
with the latex adapter if needed. (See Figure 7 and inset.)
7. Open the clamps on fluid supply bag B.
C.
B.
8
