4.3 IP Configuration
By default, the “IP config” is set to “Automatic IP”. This is the recommended setting and
will allow the NAS Dongle to obtain it IP address automatically. If you prefer setting it
manually, select the static IP option, enter your own value and click apply to confirm the
new setting.
Setting it manually is useful when it often obtain a different IP address but you have a static
IP address in order to mount the network drive or setup port forwarding as an example.
4.4 Disk Utility
In this page, you can manage the hard disk setting.
Format: For first time installation, you need to format hard disk into FAT 32 system file,
this procedure applies to either new or used hard disk.
Sleep Time: This is to select time frame to setup hard disk sleeping mode.
Scan Disk: After the scan, it will show the number of file content and health status for the
hard disk.
