NARVI B-2003, Manual

Page: 19 / 68

1.2 Setting of clock
1. Press the SET key and hold it down until the hours start to flash.
Use the +/- key to set the hours.
2. Press the SET key again and minutes will start flashing. Set the minutes.
3. Press the SET key again to set the day using the +/- key.
1= Monday… 7= Sunday
4. One more pressing of the SET key will display and store the set time.
GB
1. CONTROL CENTRE B-2003
1.1 Instructions for control centre use
1. Menu, the functions of the scrolling key starting from the basic display:
First press, adjustment of pre-selection time.
Second press, adjustment of switching-on time.
Third press, adjustment of target temperature.
Fourth press, measured temperature.
2. When the display is off, pushing the I/O switch will switch on the control
centre. When the switch is turned to position I, the pre-selection time
will be displayed.
The pre-selection time remains on the display for 5 seconds, and then
the measured temperature is displayed. When the measured temperature
appears on the display, the heating resistors are switched on.
3. Light switch for sauna.
4. Adjustment of time and temperature.
5. Adjustment of time and temperature.
6. Display.