NARGESA NF70, Instruction Book

Page: 12 / 41

INSTRUCTIONS BOOK FOR THE END WROUGHT IRON MACHINE NF70 11
5. OPERATIONS
The forging machine NARGESA NF70 has got 2 working modes:
- Manual mode
- Simple mode
- Semi-automatic mode
Before explaining the modes, we’ll explain the different components and features of the forging machine
NARGESA NF70
5.1. Description of control panel
On the side of the forging machine NF70 NARGESA there is the control panel where the user can identify
where the various controls of the machine are located. These controls are located in the following figure.
5.1.1. Description of keypad
The functions for each key are detailed below:
+ Key allows us to increase the number of cycles in semi-automatic mode.
- Key allows us to decrease the number of cycles in semi-automatic mode.
→] Key allows us to access the menu to set the number of cycles in semi-automatic mode.
ESC key allows us to interrupt the programming process that we are currently running.
Reverse key allows us to turn the rollers in the reverse direction (only during initiation).
Forward key allows use to turn the rollers in the forward direction (only during initiation).
Simple mode key allows us to access simple mode.
Counter key allows us to clear the counter displayed on screen.
Numeric keys allows us to access the semi-automatic mode in each of the 8 memory slots.
Drive potentiometer regulates the speed of the machine
Safety devices reset button
Tension flashing
light
Drive potentiometer
Sound warning
Morning switch
Screen
Emergency stop
Alarm flashing
light
Reset button
Keypad