NARGESA NF70, Instruction Book

Page: 9 / 41

INSTRUCTIONS BOOK FOR THE END WROUGHT IRON MACHINE NF70 8
3. MAINTENANCE AND CLEANING
3.1. General maintenance
The NF70 NARGESA forging machine has been conceived and designed to be almost maintenance free.
The only point to note regarding maintenance is the level of lubricant of the gearbox. This level may be ob-
served through the inspection peephole (1) visible in the side of the case, once the rear protection has
been disassembled.
In the event that the level is low, fill it up with oil SAE 80-140 by the filler hole (2) until oil is visible through
the peephole (1) (about half of the sight glass). A review of this parameter must be carried out at least once
every 3 months.
3.2. Cleaning
The machine NARGESA NF70 is designed to work with hot material (forged), which involves a large
amount of slag, chaff, etc is generated. during regular work. For the operator’s comfort, the NF70 has a
collector drawer at the bottom of the working area, wherein said slag falls, so it is advisable to periodically
empty it.
Collector drawer