NARGESA MC150B, Instruction Book

Page: 8 / 29

MC150B BENDING MACHINE INSTRUCTION BOOK 7
2. TRANSPORT AND STORAGE
2.1. Transport
There are two ways of carrying out the transportation of the machine:
- From the bottom, through the base of the machine, using a pallet jack or forklift as shown in the
illustration. Never raise the machine more than 200 mm from the surface in order to prevent the risk of
tipping
- From the top of the machine, from the anchor point designed for this purpose defined in figure 4, using a
crane or forklift
.
Figure 4. Transportation of the machine
The design of the section bending machine MC150B allows the chassis inside the bench to reduce its
volume when transported. Picture 5 shows this arrangement.
Picture 5. Option for transporting the machine
WARNING: Before moving the machine it is essential to check that all screws fasting the chassis
of the section bending machine to the table, are properly tightened to prevent damage to the machine
and users who handle it.