NARGESA MC 400-9, Instruction Book

Page: 9 / 18

MC400 BENDING MACHINE INSTRUCTION BOOK 7
4. INSTRUCTIONS FOR THE USAGE
4.1. Instructions for the adjustment.
This machine hasnt got any adjustable element, with the exception of any kind of repair.
4.2. Waste danger (That cannot be eliminated). Hazard caused by adjusted elements.
Always keep in mind that hands must not be placed in the roller moveable parts of the rollers since
there might be risk of cutting out the fingers, hands or arms.
The machine performance place must be protected to prevent the operative from any possible damage
with the bent material.
4.3. Information about forbidden methods of use.
Do not use tooling that are not provided by the manufacturer as a way to avoid the breakdown of any
element that could injure the user.
4.4. Instructions for locating breakdowns, repair and rearming of the machine.
Due to its simple mechanism, this machine does not tend to breakdowns. The only possible one could
be the handling fuse change in the electric box. This is located in the back part of the machine. In order
to replace it, the machine must be unplugged and the back coverwhere the reducer is, must be
removed. There will be a white PVC box where the electric handling and the protection fuse. In case
you need to substitute one, it is advisable to put one of the same value.