NARGESA C3006, Instruction Book

Page: 22 / 71

C3006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 21
5.8. Deletion of the cutting meter
Another interesting choice for the machine is the possibility it has to erase the meter for the cutting
operations made in the different memories of the top. Therefore, in case the meter requires to be deleted,
follow carefully the explanation below.
First and by means of the Navigation keys locate in a place on the top memory which cutting meter is to be
deleted.. For instance, locate memory number 2 which shows the following information:
Picture 34. Information about the memory of the top 2
As it could be seen the meter of the top memory nº 2 informs that 13 cutts have been made. In order to
eliminate this meter , just press the CNT key.
If you do so, a label will show up on the screen with the following information:
Picture 35. Access screen to delete the cutting meter.
If now you press the Return key, you will be confirming that you want to delete the current meter: it will be
deleted and will go back to the current top memory once the meter has put to 0.
Picture 36. Information of the memory of top 2 with the meter already deleted.
If on the other hand, when the message is displayed on Picture 35, you press the Esc key, it will go back
also to the current top memory without having deleted the meter.
Picture 37. Information of the top memory 2 after cancelling the meter deletion
Therefore, each time you want to delete the meterof the current memory, just follow the steps described in
this section.
M02 CONT: 0000
TOP = 56 mm
DO YOU WANT TO
DELETE THE METER?
M02 CONT: 0000
TOP = 56 mm
M02 CONT: 0013
TOP = 56 mm