15
To select from the PROBES IN MEMORY...
1. If you haven’t already, press
F1 (MEASURE).
2. The model number and the serial number of the last
probe used will be displayed on the second line of the
display. If you want to use the same probe, press
Enter.
3. If you want to use a different probe, look for the model
number in the positions above the F1, F2, or F3
legends. Up to three additional models can be found
by pressing
F4 (MORE).
4. Press the appropriate function key and the probe
model and serial number will be displayed on the
second line of the screen. If this is correct, press
Enter.
5. A new screen will appear specifying probe model
number, serial number, frequency range, field type,
maximum measurement range, and type of response
(flat or shaped). If this information is correct, press
F1
.
If this information does not match your requirements,
you need to select another probe. Press
F2
and you
will go back to the
Select Probe Screen
to make
another selection.
6. Proceed with the probe zeroing process.
S E L E C T
P R O B E
M O D E L
A 8 7 2 2
S N
D
X X X X X
O R
S E L E C T
F R O M
L I S T
8 7 X X
8 7 X X
8 7 X X
M O R E
F1
F2
F3
F4
A 8 7 4 2 D
S / N
0 0 0 0 1
3 0 0
H
- 3 G H z
z
k
E - F L D
6 0 0
%
S T D
S H A P E D
Y E S
N O
M E N U
F1
F2
F3
F4
