13
4
Making a Measurement
Introduction
This section will help you take measurements with your Model
8718. Information is included for turning the meter on, selecting,
zeroing, and testing a probe, plus an explanation of the main
measurement screen of the meter. Some general information is
also included about measurement surveys, precautions you
should observe, and the use of probe correction factors.
Getting Started
Press the
ON
power key. After a few seconds, the display
screen will show the meter's calibration date and tell you to
CONNECT PROBE NOW.
To Make Measurements...
1. Select the probe you want to use and connect it to
the meter.
2. Press
F1
and proceed to enter the probe model
number
To access the meter’s menu system to perform some other
function...
1. Press
F4
. The first of three menu screens will appear.
See
Section 5, Menu System
, for details on features
and operation.
