ALTITUDE DISPLAY
Displays the altitude data supplied to the AT165 from the blind altitude encoder.
PRESSURE ALT 08500ft
XXXXXXXXXXXXXX
For altitudes less than –1,000ft and greater than 30,700ft bars will be displayed.
Additionally bars will be displayed when an illegal altitude code is received.
ALTITUDE HOLD
HOLD MODE
PRINTED IN U.S.A. REV C JANUARY 2005
+0100ft HLD-> 01000ft
XXXXXXXXXXXXXX
Pressing
HOLD
will capture the Aircraft’s current altitude and use it as the
reference for the hold function. The altitude display will now show the
reference altitude and the deviation from that altitude in 100ft increments. If
the deviation exceeds the BUFFER limit, the altitude display will flash. If the difference exceeds ±9900ft bars
will be displayed.
BUFFER SETTING
LIMIT +-0000ft
XXXXXXXXXXXXXX
Pressing
HOLD
for greater than 2 seconds will allow setting of the
HOLD
BUFFER
value. Use the Data Entry switch to set the desired
HOLD BUFFER
value. The
HOLD BUFFER
can be set from 200ft to 2500ft in 100ft steps.
When finished, press
HOLD
to save the
HOLD BUFFER
value.
