background image

 18

SAFETY HINTS

 

1.  The high level of safety can be maintained only if it is examined regularly for damage and 

abrasion, please pay special attention to components most susceptible to wear, e.g. rear 
stabilizer cap, transportation wheels, pedals, foam grip and seat. 

2.  Damaged parts need to be replaced immediately and please only exercise again once 

properly repaired. 

3.  Incorrect and excessive exercise can harm your health. 
4.  Any of the adjustment devices that could interfere with user’s movement should not be left 

projecting. 

 

USE AND FUNCTIONS

 

This magnetic bike is designed for home training. 

The pedal crank training equipment is tested according to EN957-1/-5, class HB for home use with a 

maximum user weight of 150 kgs and is NOT suitable for therapeutical use. 

This item is speed-independent, you can adjust the load/intensity with the help of the adjusting 

knob. 

 
Equip. Size:   

L= 102cm, W=52cm, H=146cm 

Equip. Weight:   

26 kg 

 
WARNING:  BEFORE BEGINNING ANY EXERCISE PROGRAM CONSULT YOUR PHYSICIAN. 

THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR 
PERSON WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS 
BEFORE USING ANY FITNESS EQUIPMENT. WE ASSUME NO RESPONSIBILITY 
FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINS BY OR THROUGH 
THE USE OF THIS PRODUCT. 

 

 

NOTE: 

1. 

Above described parts are all the parts you need to assemble this machine. Before you 
start to assemble, please check the hardware packing to make sure they are included. 

2. 

All the other parts described on page 9-10(parts list) are pre-assembled at the factory. 

 

Summary of Contents for NPL-U023












Reviews: