Napoleon ultra chef 485 series, User Manual

Page: 25 / 100

25
www.ultrachefgrills.com
4 x N570-0082 (1/4-20 X 5/8”)
3/8”(10mm)
4 x N735-0001 (insulated washer)
12. Side Shelf Installation
Insert (4) 1/4 - 20 x 5/8” screws through the washers into the threaded holes in the side of the base; do not tighten all the
way. Slide the assembled side shelf over the screw heads and finish tightening.
13. Side Burner Installation
Insert (4) 1/4-20 x 5/8” screws through the washers into the threaded holes in the side of the base; do not tighten all the
way. Slide the assembled side burner over the screw heads and finish tightening. Fit the orifice into the burner tube and
secure with the hose retainer clip supplied. Attach the wire from the manifold to the side burner electrode.
4 x N570-0082 (1/4-20 X 5/8”)
3/8”(10mm)
4 x N735-0001 (insulated washer)
WARNING!
The Infrared side burner
is supplied with a drip pan which holds
only a minimal amount of grease. To
prevent grease fires, the pan must be
cleaned after each use.
Fit orifice into burner
tube and secure with hose
retainer clip supplied.
1 x N160-0016 (clip)
485RSIB MODEL