Napoleon Tourch GSST8N Installation And Operating Instructions Manual Download

Page: 22 / 28

W415-0689 / A / 06.08.10

10.0 REPLACEMENTS

Contact your dealer or the factory for questions concerning prices and policies on replacement parts. Normally
all parts can be ordered through your Authorized dealer / distributor.

FOR WARRANTY REPLACEMENT PARTS, A PHOTOCOPY OF THE ORIGINAL INVOICE WILL BE
REQUIRED TO HONOUR THE CLAIM.

When ordering replacement parts always give the following information:
•

Model & Serial Number of appliance

•

Installation date of appliance

• Part

number

•

Description of part

• Finish

* IDENTIFIES ITEMS WHICH ARE NOT ILLUSTRATED. FOR
FURTHER INFORMATION, CONTACT YOUR AUTHORIZED DEALER.

41.1

FAILURE TO POSITION THE PARTS

IN ACCORDANCE WITH THIS

MANUAL OR FAILURE TO USE ONLY

PARTS SPECIFICALLY APPROVED

WITH THIS APPLIANCE MAY

RESULT IN PROPERTY DAMAGE OR

PERSONAL INJURY.

WARNING

COMPONENTS

REF NO.

PART NO.

DESCRIPTION

W225-0223

DOOR FRAME

W562-0008

DOOR GASKET

W010-1959

GLASS C/W GASKET

W300-0110

GLASS

W100-0111

BURNER

W357-0006

IGNITOR

W190-0026

CONTROL, MODULE

W750-0202

WIRE HARNESS

W750-0184

IGNITION CABLE

W200-0263

IGNITOR COVER

W200-0262

BURNER COVER

W725-0052

NATURAL GAS VALVE - 3.5” W.C.

W725-0053

PROPANE GAS VALVE - 10.0” W.C.

13*

W455-0085

NATURAL GAS ORIFICE

13*

W455-0086

PROPANE GAS ORIFICE

W475-0590

BACK PANEL

15*

W300-0108

ACCENT GLASS (BLACK)

16*

W562-0046

ROPE GASKET, BACK PANEL

17*

W385-0334

NAPOLEON® LOGO

W475-0595

CONTROL PANEL

19*

W385-0380

CONTROL PANEL LABEL

20*

W660-0082

OUTDOOR ON/OFF SWITCH

ACCESSORIES

REF NO.

PART NO.

DESCRIPTION

TMCSS

MOUNTING CABINET

TFSSO

FRAME KIT

23*

LK8

LIGHT KIT

24*

W573-0002

HIGH TEMPERATURE SEALANT

25*

W573-0007

HIGH TEMPERATURE SEALANT

26*

W175-0270

CONVERSION KIT - NG TO LP

27*

W175-0274

CONVERSION KIT - LP TO NG

Summary of Contents for Tourch GSST8N





























Search results

Summary of Contents for Tourch GSST8N

Reviews:

Related manuals for Tourch GSST8N

Brands by name

Popular brands

Napoleon Tourch GSST8N, Installation And Operating Instructions Manual

Search results

Summary of Contents for Tourch GSST8N

Reviews:

Related manuals for Tourch GSST8N

Brands by name

Popular brands