Operation |
13
Napoleon.com
|
Prestige Pro
®
Series
i
llumination
i
nStructionS
Motion Sensor and Knobs, Oven and Cabinet Lights (if equipped)
T
urn the Power Switch ON located on the box inside the grill cabinet.
A red and a blue LED light will turn on. Illumination settings are in Default mode.
Default mode
• Knob light mode Blue
• Brightness on high
• Motion Sensor is On
Knob lights modes
• Blue
• White
• Green - color spectrum mode
Select Knob light mode by holding down the
switch to toggle from blue to white to green.
Release it on the desired mode.
Go back to Default mode: by holding down the
button for 2 seconds.
Brightness can be adjusted in these modes only
•
When you have the knobs on the Color spectrum mode the knobs will slowly cycle
through the color spectrum, starting at green.
•
Quickly Press
Twice to stop the spectrum at any color you choose
•
Press twice again to let it continue changing colors.
Motion Sensor
•
The knob and logo lights will remain ON as long as motion is detected
within 1 meter in front of your grill. They will turn off after 15 minutes of inactivity.
•
While the motion sensor is ON (as indicated by the blue LED), you can turn the
oven and cabinet lights on and off with the
switch.
•
Press the
button in the box to turn the sensor OFF (indicated by blue LED).
•
Now all your lights are controlled with the
switch.
•
The oven and cabinet lights will turn off after two hours.
If the motion sensor is OFF, the knob and logo lights will also
shut off after two hours.
Brightness: Press the
button to change brightness
between high (100%), medium (65%) and low (35%).
This can only be changed when the knob lights are in
White or Blue Mode
Illumination Modes
Selecting a Color
Kn
ob
a
nd
Lo
go
Lights
work togeth
er
If
t
he
P
ow
er Switch is O
FF
The
ignition will no
t w
or
k
•
The logo and knobs lights work as a set. However, you can also turn the logo
light off while keeping the knobs light on.
•
Double click the
button to turn on the logo light OFF at any time.
Double click the
again to turn back on.
•
If the unit is powered OFF and ON again (main power switch), the logo light
will return to its default mode
Logo light ON / OFF
O
pe
ra
tio
n
