12
EN
www.napoleongrills.com
N415-0293 OCT 09.17
Conversion to Natural Gas
WARNING!
This conversion kit shall be installed by a qualified service agency in accordance
with the manufacturer’s instructions and all applicable codes and requirements of the Authority
Having Jurisdiction. If the information in these instructions is not followed exactly, a fire, explosion or
production of carbon monoxide may result causing property damage, personal injury or loss of life.
The qualified service agency is responsible for the proper installation of this kit. The installation is
not proper and complete until the operation of the converted appliance is checked as specified in the
manufacturer’s instructions supplied with the kit.
WARNING!
To avoid the possibility of burns conversions should only be done when the patio
flame is cool. Ensure burner is turned off. Turn gas off at source and disconnect the patio flame before
beginning conversion.
WARNING!
Glass embers may have sharp edges wear safety glasses and gloves when handling.
WARNING!
This conversion must be performed by a licensed gas fitter, and all connections must
be leak tested before operating the patio flame.
Your patio flame can be easily converted to natural gas by following these steps:
1. Remove the glass embers from the tray.
2.
Remove the glass tray from the patio flame by removing the (18) screws that hold the tray in place.
3.
Carefully lift the glass tray from the patio flame and set aside. Take care not to damage or kink the
thermocouple wire.
4.
5.
Disconnect the stainless steel flex connector from the orifice using (2) wrenches.
