11
W415-0807 / C / 09.02.16
NAILING
NAILING
TAB
TAB
!
WARNING
RISK OF FIRE, MAINTAIN ALL SPECIFIED AIR SPACE CLEARANCES TO COMBUSTIBLES. FAILURE
TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE A FIRE OR CAUSE THE APPLIANCE TO
OVERHEAT. ENSURE ALL CLEARANCES (I.E. BACK, SIDE, TOP, VENT, MANTEL, FRONT, ETC.) ARE
CLEARLY MAINTAINED.
WHEN USING PAINT OR LACQUER TO FINISH THE MANTEL, THE PAINT OR LACQUER MUST BE
HEAT RESISTANT TO PREVENT DISCOLOURATION.
73.1
4.3
MINIMUM MANTEL CLEARANCES
MANTEL DEPTH
15
12
14
13
4
2
16
17
8
6
0
0
$
1
7
(
/
+
(
,
*
+
7
7” MANTEL
16”
14”
12”
TOP OF UNIT
17”
2” MANTEL
4” MANTEL
6” MANTEL
4.4 NAILING
TAB
To install the appliance face fl ush with the fi nished surface, position the
framework to accommodate the thickness of the fi nished surface. Bend out the
four nailing tabs, attached on either side of the appliance and secure to the 2x4
framing. The tabs will facilitate the installation of either a 3/4” or a 1” fi nished
surface thickness. The nailing tabs must not be removed.
We recommend all mantels made from non-combustible material. If using combustible materials, follow the
chart below.
NOTE: Mantel temperatures will rise above normal temperatures and may be hot to the touch.
