Napoleon GSS36N, Installation And Operation Instructions Manual

Page: 2 / 12

2
W415-0369 / F / 12.10.07
PG 3-4 INTRODUCTION
Warranty
General Instructions
General Information
5-6 INSTALLATION
Gas Installation
Combustion and Ventilation Air Provisions
Clearance to Combustibles
Framing
Mantel Clearances
Nailing Tab Installation
7-8 FINISHING
Log Placement
Curtain Mesh
Hood Installation
Logo Placement
Louvre Installation
9 OPERATION / MAINTENANCE
Operating Instructions
Maintenance
Venturi Adjustment
10 REPLACEMENTS
Ordering Replacement Parts
Replacement Parts
11-12 TROUBLE SHOOTING GUIDE
TABLE of CONTENTS
PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE
• Under no circumstances should this fi replace be modifi ed.
• Provide adequate ventilation and combustion air. Provide adequate accessibility clearance for servicing
and operating the fi replace. Never obstruct the front opening of the fi replace.
• If fi replace keeps shutting off, have it serviced. Keep burner and control compartment clean.
• Do not burn wood or other materials in this fi replace.
• Adults and especially children should be alerted to the hazards of high surface temperatures and should
stay away to avoid burns or clothing ignition. Keep young children and animals away when the fi replace
is hot.
• Clothing or other fl ammable material should not be placed on or near the fi replace.
• Any safety screen or guard removed for servicing must be replaced prior to operating the fi replace.
• It is imperative that the control compartments, burners and circulating air passageways in the fi replace
are kept clean. The fi replace should be inspected before use and at least annually by a qualifi ed service
person. The fi replace area must be kept clear and free from combustible materials, gasoline and other
fl ammable vapours and liquids.
• Furniture or other objects must be kept a minimum of 4 feet away from the front of the fi replace.
• Do not use this fi replace if any part has been under water. Immediately call a qualifi ed service technician
to inspect the fi replace and to replace any part of the control system and any gas control which has been
under water.
• Do not allow wind to blow directly into the fi replace. Avoid any drafts that alter burner fl ame patterns.
• Do not use any accessory not approved for use with this fi replace.
ANY CHANGE TO THIS FIREPLACE OR ITS CONTROLS CAN BE DANGEROUS
AND IS PROHIBITED.
NOTE: Changes, other than editorial, are denoted by a vertical line in the margin.
!
WARNING