3
W415-1002 / B / 04.14.16
2.2 LOG
PLACEMENT
!
WARNING
FAILURE TO POSITION THE LOGS IN ACCORDANCE WITH THESE DIAGRAMS OR FAILURE TO USE
ONLY LOGS SPECIFICALLY APPROVED WITH THIS APPLIANCE MAY RESULT IN PROPERTY DAMAGE
OR PERSONAL INJURY.
LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN THE APPLIANCE. DO NOT MODIFY THE
PROPER LOG POSITIONS, SINCE APPLIANCE MAY NOT FUNCTION PROPERLY AND DELAYED
IGNITION MAY OCCUR.
THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.
76.1A
A.
Place the rear log as shown, ensuring the
holes on the underside are placed onto the 2
pins of the log support.
In order to assemble the log set, the glass door must be removed, see "GD19 INSTALLATION
INSTRUCTIONS".
C.
Place the center log as shown, ensuring the
holes on the underside are placed onto the
two centre pins.
D.
Place the hole in the underside of the right
log onto the locating pin, on the burner base
and rests against the rear log as shown.
E.
Re-install the glass door.
B.
Place the left log as shown, ensuring the hole
on the underside is placed onto the burner
pin. This will rest on the left side of the rear
log.
2.3 CHARCOAL
EMBERS
32.1
Randomly place the charcoal embers along the front and sides of the log support tray in a realistic manner.
Fine dust found in the bottom of the bag should not be used.
NOTE: Charcoal embers are not to be placed on the burner.
2.4 VERMICULITE
33.1
Sprinkle vermiculite around the charcoal embers.
NOTE: Vermiculite is not to be placed on the burner.
3
4
BRACKET
