2
W415-1002 / B / 04.14.16
This burner and log assembly are approved for use in the GD19 gas appliance only. They are not approved for
use as a stand alone appliance or in conjunction with any other appliance.
1.0 GENERAL INFORMATION
2.0 INSTALLATION
2.1 BURNER
INSTALLATION
1.0 GENERAL
INFORMATION
2
2.0 INSTALLATION
2
2.1 BURNER
INSTALLATION
2
2.2 LOG
PLACEMENT
3
2.3 CHARCOAL
EMBERS
3
2.4 VERMICULITE
3
2.5 GLOWING
EMBERS
4
3.0 ADJUSTMENT
4
3.1 FLAME
CHARACTERISTICS
4
3.2 VENTURI
ADJUSTMENT
4
4.0 REPLACEMENTS
5
BURNER
ASSEMBLY
SCREW
LOCATIONS
ORIFICE
LOCATION
Before installing the burner, adjust the air shutter for the
desired fuel and install the fuel conversion kit if required.
See “VENTURI ADJUSTMENT” section.
A.
Install the burner assembly ensuring that the venturi tube
fi ts over the orifi ce.
B.
Secure using the screws provided.
NOTE: Changes, other than editorial, are denoted by a line in the margin.
TABLE OF CONTENTS
