Napoleon BIPRO665RBPSS-3, Manual

Page: 9 / 64

9
EN
www.napoleon.com N415-0542 OCT 02.19
Wood for smoking comes in various forms, chunks, chips, dust and pellets, it also comes in many varieties
(flavours) from apple to walnut, each transmitting a different taste. Use only wood that you know has not
been treated, or better still buy from your authorized Napoleon dealer.
Illumination Instructions
Motion sensor and Knobs and Oven Lights
Turn the Power Switch ON located on the control box.
The control box should be to the left side of the inside of your cabinet, where the grill
head has been mounted on.
(See control box installation section in this manual for further reference).
A red and a blue LED light will turn on. Illumination settings
are in
Default mode.
Default mode
• Knob light mode Blue
• Brightness on high
• Motion Sensor is On
Knob lights modes
• Blue
• White
• Green - color spectrum mode
Select Knob light mode
by holding down the switch to toggle from
blue
to
white
to
green
.
Release it on the desired mode.
Go back to Default mode: by holding down the button for 2 seconds .
Brightness can be adjusted in these modes only
• When you have the knobs on the Color spectrum mode the knobs and the logo will slowly cycle
through the color spectrum, starting at green.
• Quickly Press Twice to stop the spectrum at any color you choose
• Press twice again to let it continue changing colors.
Motion Sensor
• The knob and logo lights will remain ON as long as motion is detected
within 1 meter of your grill. They will turn off after 15 minutes of inactivity.
• While the motion sensor is ON (as indicated by the blue LED), you can turn
the oven lights on and off with the switch.
• Press the button in the box to turn the sensor OFF.
• Now all your lights are controlled with the switch.
• The oven lights will turn off after two hours.
If the motion sensor is OFF, the knob and logo lights will also
shut off after two hours.
Brightness: Press the button to change brightness
between high (100%), medium (65%) and low (35%).
This can only be changed when the knob lights are in
White or Blue Mode
Illumination modes
Selecting a color
Kn
ob
a
nd
Lo
go
Lights
work togeth
er
I
f
th
e
Po
we
r Switch is OFF
the ignition will
no
t w
or
k