W415-1698 / 12.20.16
25
EN
6.3
CONTROL PANEL REPLACEMENT
6.4
LED REPLACEMENT
1. Disconnect the quick connector from the control panel (Figure 1).
2. Push in the holding tabs of the control panel and gently push the control panel out of the plate (Figure 2).
3. Install the new control panel into the plate. Ensure to push the new control panel gently until you hear a
click to confi rm that the holding tabs are secure.
4. Plug the quick connector to the new control panel.
1.
Find the connector on the PCB for the LED strip you want to replace and follow it to the LED strip.
2.
Cut the cable tie and release the wire harness from the LED.
3.
Use a pair of needle-nose pliers to pinch the plastic connectors to release the LED.
4.
Install the new LED strip and plug in the necessary wire connectors to the new LED strip.
FIG. 1
FIG. 2
Summary of Contents for Allure NEFL100FH
