Mounting the IQ Profiler to a Flat Wall
To mount the IQ Profiler on a flat wall, push through any of
the 4 recesses marked “flat wall mount” on the base detail
diagram.
Swivel Bracket Mounting the IQ Profiler
The optional SVL2 Swivel Bracket Kit may be used to
mount the IQ Profiler units against a wall or under a ceiling
and provides vertical and horizontal tilting, To mount the
SVL2 to the IQ Profiler, follow the detailed instructions
included with the SVL2.
Mounting Height Index
On the left of the IQ Profiler circuit board is the Mounting
Height Index, which must be set according the parameters
of the installation. Adjust the Mounting Height Index by
gently pushing outward on the PC board height index tab
located on the left edge of the housing. Slide the circuit
board up or down until the Height Index on the Tab aligns
with the appropriate Height Index setting on the circuit
board.
Index 2
Set the PCB mounting height index to 2 if the unit is
mounted at a height of 8.5 feet.
Index 3 (default setting)
The PCB mounting height index is set to 3 for a Standard
Installation or if the unit is to be installed in a Pet Avoidance
Installation.
11
Summary of Contents for IQ PROFILER -
Page 14: ...14...
